(Minghui.org) I have an L805 printer, and recently the printouts were becoming blurry. I wondered if the print head needed to be cleaned.
While shopping for supplies, I asked the owner about the printer, and he said it had to do with the print head. I asked if the store carried small bottles of cleaning solution.
He said they only had the large size, and that I could bring the printer to the store for cleaning. I wanted to clean it myself, so he gave me a bit of cleaning solution in a syringe and told me to inject the solution under the printer head. I thanked him and left, and I didn’t think much of it since I often shop at this store.
After checking the printer, I injected the cleaning solution into the small box under the print head. The next day, I noticed the outer ink storage cartridge was almost out of black ink, with only a bit of red ink left. The external waste ink container was almost full (500ml).
I refilled the cartridge with black ink, but I wasn’t sure how to pump the black ink into the inner cartridge. I pushed a few buttons but I couldn’t tell if the ink went in.
I printed a test page and it only showed red with no other colors. After cleaning it, still only the red color came out, which meant that no black ink was added.
A day later, I read the printer manual and followed the instructions to add ink. Everything was the same, and I couldn’t tell whether the inner ink cartridge was filled or not.
I looked at the outer ink cartridge and there was less ink. I printed a test page and it was just in red. After cleaning it again, it only printed in red. So I didn’t want to mess with the printer anymore.
By day three, I thought the issue was not the printer, but there was probably something wrong with my xinxing. I looked inward and remembered that I didn’t want to take the printer to the shop because it was too much trouble.
I had an attachment to petty gains and took a bit of cleaning solution from the owner, and I wasted more ink in the end. This reminded me that as a practitioner, I should be strict with myself and not behave like a non-practitioner.
When I studied the Fa, I read what Master said,
“... you will not be able to levitate if your fingertip, toe tip, or a certain part of your body is locked.” (Lecture Eight, Zhuan Falun)
There must have been some kind blockage inside the printer, so I communicated with it, “It’s an honor for you to be here to help Dafa practitioners awaken people. I probably did something wrong and caused you to malfunction. I’m sorry. I’m going to clean the field around you, so please make the adjustment yourself.”
I sat down and sent forth righteous thoughts, “Eliminate the interference in another dimension that caused the printer to malfunction.” I turned on the printer and printed a test page.
There were broken lines in a few places, so I knew the ink went through. After cleaning the printer, there was only one broken line in blue. I cleaned it again, and it worked properly.
Cultivators are different from non-cultivators. We should look inward first when we have issues with the printer, and the situation can change.
Views expressed in this article represent the author's own opinions or understandings. All content published on this website are copyrighted by Minghui.org. Minghui will produce compilations of its online content regularly and on special occasions.
Category: Cultivation Insights
